Class

SMTPSocket


Warning

This item was deprecated in version 2018r4. Please use SMTPSecureSocket as a replacement.

Description

Used to send email via the SMTP protocol. Use the EmailMessage class to create the email message to send.

Events

Name

Parameters

Returns

ConnectionEstablished

Greeting As String

DataAvailable

Error

e As RuntimeException

MailSent

MessageSent

Email As EmailMessage

SendProgress

BytesSent As Integer, BytesLeft As Integer

ServerError

ErrorID As Integer, ErrorMessage As String, Email As EmailMessage

Property descriptions


SMTPSocket.Address

Address As String

The TCP/IP address to try to connect to.

In this example, the address has been entered into a TextField.

TCPSocket1.Address = TextField1.Text

SMTPSocket.BytesAvailable

BytesAvailable As Integer

The number of bytes of data are available in the internal receive buffer.

This property is read-only.

TextField1.Text = Me.BytesAvailable.ToString

SMTPSocket.BytesLeftToSend

BytesLeftToSend As Integer

The number of bytes left in the queue remaining to be sent.

This property is read-only.

This enables you to create a synchronous socket without needing to subclass it.

TextField1.Text = Me.BytesLeftToSend.ToString

SMTPSocket.Handle

Handle As Integer

This is the socket's internal descriptor and it can be used with Declare statements.

This property is read-only.

  • On Windows, Handle is a Socket, suitable for use in Declares on Windows.

  • On macOS and Linux, Handle is a UNIX socket descriptor.

The descriptor is platform-specific. If Handle is less than zero, the descriptor is not available.


SMTPSocket.IsConnected

IsConnected As Boolean

Indicates whether the socket is currently connected.

This property is read-only.

For TCPSockets, a connection means you can send and receive data and are connected to a remote machine. For UDPSockets, this means that you are bound to the port and are able to send, receive, join or leave multicast groups, or set socket options.

If EasyUDPSocket1.IsConnected Then
  ' proceed using the connection
Else
  MessageBox("Connection failed!")
End If

SMTPSocket.LocalAddress

LocalAddress As String

The local IP address of the computer.

This property is read-only.

Var localIP As String = Socket1.LocalAddress

SMTPSocket.Messages

Messages As EmailMessage

The queue of messages that is waiting to be sent.

This is an array of which the 0th element is the next message to be sent. When a message is sent, it is removed from the queue and passed to the MessageSent event. To append a message to the queue, use the Arrays method. To remove a message, use the Arrays method.

Send a simple email:

Dim mail As EmailMessage

' set up the socket
Socket1.Address = "smtp.myserver.com"
Socket1.Port = 25

Socket1.UserName = "<username>"
Socket1.Password = "<password>"

' populate the email message
mail = New EmailMessage
mail.FromAddress = "test@testsite.org"
mail.Subject = "My Subject"
mail.BodyPlainText = "Hello!"
mail.Headers.AppendHeader("X-Mailer","SMTP Test")

' send the email
Socket1.Messages.Append(mail)
Socket1.SendMail

SMTPSocket.NetworkInterface

NetworkInterface As NetworkInterface

Specifies which network interface the socket should use when binding.

You can get the network interface(s) of the user's computer by calling the GetNetworkInterface method of the System module.

Leaving this property set to Nil will use the currently selected interface. In the case of UDPSockets, if you assign a non-Nil value, the socket may not be able to receive broadcast messages. The behavior is OS-dependent; it appears to work on Windows but not on other supported operating systems. If you wish to send broadcast packets out, then you should not bind to a specific interface because the behavior is undefined.

This example specifies that the TCPSocket will use the first Network Interface on the user's computer.

TCPSocket1.NetworkInterface = System.NetworkInterface(0)

SMTPSocket.Password

Password As String

The Password to use to log into the SMTP server.


SMTPSocket.Port

Port As Integer

The port to bind on or connect to.

On most operating systems, attempting to bind to a port less than 1024 causes a Error event to fire with an error number 107 unless the application is running with administrative permissions. This is due to security features built into the underlying OS.

You need to set the port property explicitly before any call to Listen or Connect as the Port property will be modified to reflect what the actual bound port is during the various stages of operation.

For instance, if you listen on port 8080 and a connection comes in, you can check the Port property to ensure that you're still listening on port 8080 (that the port hasn't been hijacked). Or, if you connect to a socket on port 8080, once the connection occurs, you can check to see what port the OS has bound you to. This will be a random-seeming port number.

This trick can be very useful when you do things like Listen on port 0. In that case, the OS will pick a port for you and listen on it. Then you can check the Port property to see which port the OS picked. This functionality is used for various protocols, such as FTP.

This example sets the Port to 8080.

TCPSocket1.Port = 8080

SMTPSocket.RemoteAddress

RemoteAddress As String

The address of the remote machine you are connected to.

This property is read-only.

Use this instead of the Address property to determine the address of the machine you are actually connected to.

This example reports the address of the remote machine that the user is connected to. It is in the Connected event.

TextField1.Text = Me.RemoteAddress

SMTPSocket.UserName

UserName As String

The UserName to use to log into the SMTP server.

Method descriptions


SMTPSocket.Close

Close

Closes the socket's connection, closes any connections the socket may have, and resets the socket.

The only information that is retained after calling Close is the socket's port, address (in the case of TCPSockets), LastErrorCode properties, and data left in the socket's receive buffer. All other information is discarded.

This example closes the EasyTCPSockets that were open. The sockets were added to the main window.

Connector.Close
Listener.Close

SMTPSocket.Connect

Connect

Attempts to connect.

For TCPSockets, the address and port properties must be set. For UDPSockets, the port property must be set. The Connect method binds a socket to a port. After calling Connect, the Port property will report the actual port you are bound to.


SMTPSocket.DeleteAllMessages

DeleteAllMessages

Deletes all messages from the send queue.

This example deletes all the messages in the queue. Socket1 is an SPTPSocket in the window.

Socket1.DeleteAllMessages

SMTPSocket.Disconnect

Disconnect

Disconnects the socket, resets it, and fires a SocketCore Error event with a 102 error to let you know that the socket has been disconnected.

This example disconnects the EasyTCPSockets that were opened.

Connector.Disconnect
Listener.Disconnect

SMTPSocket.DisconnectFromServer

DisconnectFromServer

Closes the connection with the mail server.


SMTPSocket.EndOfFile

EndOfFile As Boolean

Returns True when there's no more data left to read.

This code reads the rows and columns of data from a tab-delimited text file into a ListBox:

Var f As FolderItem
Var textInput As TextInputStream
Var rowFromFile, oneCell As String

f = FolderItem.ShowOpenFileDialog("text/plain") ' defined as a FileType
If f <> Nil Then
  textInput = TextInputStream.Open(f)
  textInput.Encoding = Encodings.UTF8

  Do
    rowFromFile = textInput.ReadLine
    Var values() As String = rowFromFile.Split(Chr(9))
    ListBox1.ColumnCount = values.Count
    ListBox1.AddRow("")
    Var col As Integer
    For Each value As String In values
      ListBox1.CellTextAt(ListBox1.LastAddedRowIndex, col) = value
      col = col + 1
    End For
  Loop Until textInput.EndOfFile

  textInput.Close
End If

This example reads each pair of bytes from a file and writes them in reverse order to a new file. The user chooses the source file using the Open-file dialog box and saves the new file using the Save as dialog box. The EOF property is used to terminate the Do...Loop.

Var readFile As FolderItem = FolderItem.ShowOpenFileDialog("text")
If readFile <> Nil Then
  Var ReadStream As BinaryStream = BinaryStream.Open(readFile, False)
  ReadStream.LittleEndian = True
  Var writeFile As FolderItem = FolderItem.ShowSaveFileDialog("", "")
  If writeFile <> Nil Then
    Var writeStream As BinaryStream = BinaryStream.Create(writeFile, True)
    writeStream.LittleEndian = True
    Do Until ReadStream.EndOfFile
      writeStream.WriteInt8(ReadStream.ReadInt8)
    Loop
    writeStream = Nil
  End If
  readStream = Nil
End If

SMTPSocket.Flush

Flush

Immediately sends the contents of internal write buffers to disk or to the output stream.

This function can be useful in point-to-point communication over sockets and similar connections: To optimize for transmission performance, some types of output streams try to collect small pieces of written data into one larger piece for sending instead of sending each piece out individually. By calling Flush, the data collection is stopped and the data is sent without further delay, reducing latency.

When using this on a stream that ends up as a file on disk, it is useful, too: Any short parts of previously written data are written to disk right away, ensuring the data is actually on disk if the application terminates abruptly, e.g. due to a crash.

Avoid calling this method too often. For example, do not call it between successive Write calls because you'll slow down performance without getting much benefit.

A typical use case would look like this:

mySocket.Write("you typed: ")
mySocket.Write(key)
mySocket.Write(".")
mySocket.Flush

SMTPSocket.Listen

Listen

Attempts to listen for incoming connections on the currently specified port.

After calling Listen, the Port property will report the actual port you are bound to.


SMTPSocket.Lookahead

Lookahead([Encoding As TextEncoding]) As String

Returns a String, containing the data that is available in the internal queue without removing it.

The optional Encoding parameter enables you to specify the text encoding of the data to be returned. The default is Nil. Use the Encodings module to specify an encoding.

This example adds the contents of the internal queue to a TextArea. The Listener EasyTCPSocket has been added to the window.

TextArea1.AddText(listener.Lookahead)

SMTPSocket.Poll

Poll

Polls the socket manually, which allows a socket to be used synchronously.

The EasyTCPSocket "Listener" has been added to the window.

Listener.Poll

SMTPSocket.Purge

Purge

Removes all data from the socket's internal receive buffer. It does not affect the socket's internal send buffer.

Listener.Purge

SMTPSocket.Read

Read(Count As Integer, [Enc As TextEncoding]) As String

Reads Count bytes from the input stream and returns a String.

If provided, the optional parameter Enc specifies the text encoding to be defined for the String to be read.

If Count is higher than the amount of bytes currently available in the stream, all available bytes will be returned. Therefore, make sure to always consider the case that you get less than you requested. To see if you received all requested bytes, check the returned string's String property (avoid using Length as it may give a different number if the encoding is not nil).

If not enough memory is available, you get back an empty string.

This example reads the first 1000 bytes from a BinaryStream.

Var readFile As FolderItem = FolderItem.ShowOpenFileDialog("text/plain")
If readFile <> Nil Then
  Var ReadStream As BinaryStream = BinaryStream.Open(readFile, False)
  ReadStream.LittleEndian = True
  TextArea1.Text = ReadStream.Read(1000, Encodings.UTF8)
End If

SMTPSocket.ReadAll

ReadAll([Encoding As TextEncoding]) As String

Reads all the data from the internal buffer.

This example reads all the data in the buffer into a TextArea.

TextField1.AddText(listener.ReadAll)

SMTPSocket.SendMail

SendMail

Connects to the mail server, sends the messages in the queue, and disconnects.

This method works asynchronously. So keep the reference to this SMTPSocket object alive while mail is sent: e.g. as a property of a window.

This example is the Action event of the Send button on the Send Mail Demo main window. It sends the new message after adding it to the array of messages.

Dim mail As EmailMessage

' set up the socket
Socket1.Address = "smtp.myserver.com"
Socket1.Port = 25

Socket1.UserName = "<username>"
Socket1.Password = "<password>"

' populate the email message
mail = New EmailMessage
mail.FromAddress = "test@testsite.org"
mail.Subject = "My Subject"
mail.BodyPlainText = "Hello!"
mail.Headers.AppendHeader("X-Mailer","SMTP Test")

' send the email
Socket1.Messages.Append(mail)
Socket1.SendMail

SMTPSocket.Write

Write(Data As String)

Writes the passed data to the output stream.

Note that in order to make sure that the data actually ends up on disk or gets sent to the socket it is connected to, the stream must either get closed or the Flush method be called. Otherwise, the data, if small, may end up temporarily in a write buffer before either a certain time has passed or more data is written. This buffering increases performance when writing lots of small pieces of data, but may be causing unwanted delays when another process, e.g. the other end of a socket connection, is waiting for the data. Consider calling the Flush method to reduce latencies that this buffering may cause in such cases.

If Write fails, an IOException will be raised.

This example displays the Save As dialog box and writes the contents of the TextArea1 to a text file.

Var f As FolderItem
Var stream As BinaryStream
f = FolderItem.ShowSaveFileDialog(FileTypes1.Text, "Untitled.txt")
If f<> Nil Then
  stream = BinaryStream.Create(f, True)
  stream.Write(TextArea1.Text)
  stream.Close
End If

Event descriptions


SMTPSocket.ConnectionEstablished

ConnectionEstablished(Greeting As String)

Executes when the connection has been established with the mail server and passes the greeting string that the server returned.


SMTPSocket.DataAvailable

DataAvailable

Occurs when additional data has come into the internal receive buffer.


SMTPSocket.Error

Error(e As RuntimeException)

Occurs when an error occurs with the socket.

These error codes provide you with key information about your socket, and it is not advisable to ignore them.

When an error occurs, the RuntimeException property will likely contain one of the following error codes:

Error Code

Description

0

No error occurred.

100

There was an error opening and initializing the drivers.

101

This error code is no longer used.

102

This code means that you lost your connection.

103

The socket was unable to resolve the address that was specified.

104

This error code is no longer used.

105

The address is currently in use.

106

This is an invalid state error, which means that the socket is not in the proper state to be doing a certain operation.

107

This error means that the port you specified is invalid.

108

This error indicates that your application has run out of memory.

These are not the only errors that are returned. For Windows, additional error codes are usually positive numbers in the range [10004, 11004]. For Windows error codes, see WinSock.h. MacOS and Linux use POSIX error codes. For a description of macOS and Linux error codes, see http://www.ioplex.com/~miallen/errcmp.html.

e.g. error 64 is for "host is down".

The following example in the Error event handler displays the error code.

MessageBox(Me.e.ErrorNumber.ToString)

SMTPSocket.MailSent

MailSent

Executes when all of the messages in the queue have been sent.


SMTPSocket.MessageSent

MessageSent(Email As EmailMessage)

Executes when a message has been sent.


SMTPSocket.SendProgress

SendProgress(BytesSent As Integer, BytesLeft As Integer)

Occurs when your network provider queues your data in chunks and is about to send the next chunk.

The parameters indicate the amount of progress that has been made during the send. Returns a Boolean.

Returning True from this event causes the send to be cancelled. This does not close the socket's connection; it only clears the buffer. After all of the data has been transferred you will get a final SendProgress event followed by a SendComplete event.

bytesSent is the number of bytes that were sent in the chunk, not the total number of bytes sent.


SMTPSocket.ServerError

ServerError(ErrorID As Integer, ErrorMessage As String, Email As EmailMessage)

Executes when an error occured while sending a message.

ErrorID and ErrorMessage are sent by the mail server and Email is the message that was being sent when the error occurred. Email is removed from the queue at the time the event executes.

Notes

The POP3SecureSocket and SMTPSocket classes are used together to form the basis of an email client. POP3 is the standard internet protocol for receiving messages and SMTP (Simple Mail Transfer Protocol) is the standard internet protocol for sending emails.

SMTPSocket supports the 'login' authentication type as well as 'plain.' This increases the authentication compatibility with some servers.

If you use a constructor in a subclass of SMTPSocket, you must call the Super class's constructor in your subclass's constructor. The subclass will not work unless this is done.


Gmail

Use SMTPSecureSocket to connect to Gmail.


Xojo cloud

To access an SMTP server from web apps running on Xojo Cloud, you will first have to use the FirewallPort class to open the port used to connect to the SMTP Server:

Dim fwp As New XojoCloud.FirewallPort(587,  _
  XojoCloud.FirewallPort.Direction.Outgoing)
fwp.Open ' This call is synchronous
If fwp.isOpen Then
  ' Do what you need to do
End If

Sample code

The following code assumes an SMTPSocket named SendMailSocket, has been added to the window.

SendMailSocket.Address = "mail.mySMTPServer.com" ' your SMTP email server
SendMailSocket.Port = 25 ' Check your server for the property port # to use

' Create the actual email message
Dim mail As New EmailMessage
mail.FromAddress = "bill@yourdomain.com"
mail.Subject = "Test Email from Xojo"
mail.BodyPlainText = "Hello, World!"
mail.Headers.AppendHeader("X-Mailer", "Xojo SMTP Example") ' Sample header
mail.AddRecipient("john@domain.com")

' Add the message to the SMTPSocket and send it
SendMailSocket.Messages.Append(mail)
SendMailSocket.SendMail

Compatibility

All project types on all supported operating systems.