Class
DesktopRadioButton
Description
The radio button control that is used in the DesktopRadioGroup control.
Properties
Name |
Type |
Read-Only |
Shared |
---|---|---|---|
✓ |
|||
✓ |
|||
✓ |
|||
✓ |
|||
✓ |
|||
✓ |
Methods
Name |
Parameters |
Returns |
Shared |
---|---|---|---|
FileType As String |
|||
Type As String |
|||
x As Integer, y As Integer, width As Integer, height As Integer, immediately As Boolean = False |
|||
Events
Name |
Parameters |
Returns |
---|---|---|
Base As DesktopMenuItem, x As Integer, y As Integer |
||
HitItem As DesktopMenuItem |
||
obj As DragItem, Action As DragItem.Types |
||
obj As DragItem, Action As DragItem.Types |
||
x As Integer, y As Integer, obj As DragItem, Action As DragItem.Types |
||
Obj As DragItem Action As DragItem.Types |
||
Key As String |
||
Key As String |
||
X As Integer, Y As Integer, DeltaX As Integer, DeltaY As Integer |
||
Property descriptions
DesktopRadioButton.Active
Active As Boolean
Indicates whether the control is active.
This property is read-only.
Active is False when the control's window is not in the foreground. When a DesktopWindow is deactivated, its controls are automatically deactivated unless AllowAutoDeactivate is set to False.
DesktopRadioButton.AllowAutoDeactivate
AllowAutoDeactivate As Boolean
Determines whether the control should be deactivated (on macOS) when the parent window is deactivated. The default is True.
DesktopRadioButton.AllowTabStop
AllowTabStop As Boolean
If True, the control is in the Tab Order and accepts the focus when the user tabs into it. The default is True. If False, the user cannot tab into it to give it the focus. However, the control can gain the focus by other means, such as the user's clicking on it or by setting the focus in code.
This example removes the control from the Tab Order:
Me.AllowTabStop = False
DesktopRadioButton.Bold
Bold As Boolean
If True, applies the bold style to the control's text.
DesktopRadioButton.Caption
Caption As String
The caption of a control.
This property can be set inside the IDE or programmatically.
To set an accelerator character, precede the character in the Caption with an ampersand. In order to show an ampersand in the Caption, use two ampersands in a row.
This code sets the caption of the control to "Red".
Me.Caption = "Red"
DesktopRadioButton.Enabled
Enabled As Boolean
Determines if the radio button is clickable or not.
A disabled radio button cannot be clicked and cannot receive the focus.
This example disables the radio button. Its caption is grayed out.
Me.Enabled = False
DesktopRadioButton.FontName
FontName As String
Name of the font used to display the text content.
You can enter any font that is installed on the computer or the names of the two metafonts, "System" and "SmallSystem".
The System font is the font used by the system software as its default font. Different operating systems use different default fonts. If the system software supports both a large and small System font, you can also specify the "SmallSystem" font as your TextFont.
On macOS, "SmallSystem" specifies the OS's smaller system font and may make the control smaller in size as well. On Windows and Linux, "SmallSystem" is the same as "System".
This code sets the FontName property.
Me.FontName = "Helvetica"
DesktopRadioButton.FontSize
FontSize As Single
Point size of the font used to display text content of a DesktopControl.
If you enter zero as the FontSize, your app will use the font size that works best for the platform on which it is running.
This code sets the font size to 16 points.
Me.FontSize = 16
DesktopRadioButton.FontUnit
FontUnit As FontUnits
The units in which FontSize is measured.
See the FontUnits enumeration for valid values.
This example is in the Opening event of the control. It sets the font unit to Pixel.
Me.FontUnit = FontUnits.Pixel
DesktopRadioButton.Handle
Handle As Ptr
Returns a handle to the control.
This property is read-only.
For interfacing with Mac APIs using Declares, DesktopControl.Handle returns NSViews (except for DesktopToolbar).
On Windows returns the HWND of the control.
On Linux it returns a GtkWidget.
The following gets a handle to the control.
Var p As Ptr = Me.Handle
DesktopRadioButton.Height
Height As Integer
The height (in points) of the control.
This example sets the height of the control to 100:
Me.Height = 100
DesktopRadioButton.Index
Index As Integer
If the control is used in a control set, this specifies the control's index in the set.
This property is read-only.
DesktopRadioButton.Italic
Italic As Boolean
If True, applies the italic style to the control's text.
Mac apps can only display font styles that are available. You cannot force a font to display in bold or italic if it does not have bold or italic variations available. In this situation, the Italic property will not affect the font.
The following sets the Italic property for the control.
Me.Italic = True
DesktopRadioButton.Left
Left As Integer
The distance from the left side of the control to the left side of its containing window or container.
The following example moves the control 100 points from the left side of the window:
Me.Left = 150
DesktopRadioButton.LockBottom
LockBottom As Boolean
Determines whether the bottom edge of the control should stay at a set distance from the bottom edge of the parent control, if there is one, or the owning window.
This property can be set in the control's Inspector. The following example sets it in code.
Me.LockBottom = True
DesktopRadioButton.LockLeft
LockLeft As Boolean
Determines whether the left edge of the control should stay at a set distance from the left edge of the parent control, if there is one, or the owning window.
LockLeft and Locktop default to True when you add a new control to a window. Existing controls will be altered only if LockRight and/or LockBottom are not set. LockLeft has no effect unless LockRight is True.
This property can be set in the control's Inspector. The following example sets it in code.
Me.LockLeft = True
DesktopRadioButton.LockRight
LockRight As Boolean
Determines whether the right edge of the control should stay at a set distance from the right edge of the parent control, if there is one, or the owning window.
This property can be set in the control's Inspector. The following example sets it in code.
Me.LockRight = True
DesktopRadioButton.LockTop
LockTop As Boolean
Determines whether the top edge of the control should stay at a set distance from the top edge of the parent control, if there is one, or the owning window.
LockTop and LockLeft default to True when you add a control to a window. Existing controls will be altered only if LockRight and/or LockBottom are not set. LockTop has no effect unless LockBottom is True.
This property can be set in the control's Inspector. The following example sets it in code.
Me.LockTop = True
DesktopRadioButton.MouseCursor
MouseCursor As MouseCursor
The cursor to be displayed while the mouse is within the control and both the DesktopApplication and DesktopWindow class's MouseCursor properties are Nil.
If the DesktopApplication class's MouseCursor property is not Nil or the DesktopWindow's MouseCursor property is not Nil, then any control's MouseCursor property is ignored. You can use a cursor stored in the Cursors module. On Macintosh, you can also obtain a MouseCursor from a resource file.
This line in the Opening event of the control sets the default cursor to the finger pointer.
Me.MouseCursor = System.Cursors.FingerPointer
DesktopRadioButton.Name
Name As String
The name of the control. Set the name of the control in the Inspector.
This property is read-only.
DesktopRadioButton.PanelIndex
PanelIndex As Integer
If the control has been placed on a DesktopTabPanel or DesktopPagePanel control, this is the panel (page/tab) that the control is on. If the control is not on a panel, it returns -1.
The first panel is numbered zero. If the control has been placed on a panel of a DesktopTabPanel or DesktopPagePanel control, it returns the panel number. If the control is not on a DesktopPagePanel or DesktopTabPanel, it returns -1. If you change the PanelIndex to a nonexistent panel, the control will disappear until you give it a PanelIndex value that corresponds to a panel that exists.
If you are looking to change the currently selected panel (page/tab), use DesktopPagePanel.
This code displays the panel index of the control that is on the page.
MessageBox(Me.SelectedPanelIndex.ToString)
DesktopRadioButton.Parent
Parent As Object
Used to get and set the control's parent control or window.
If the control is on the window, the Parent will be the Window. If the control is on the container, the Parent will be the container. If the control is completed enclosed by another control, the Parent will be that control.
If you do not want the enclosing control to be the parent, set the Parent property of that control to Nil to make it the Window.
If the parent control is somehow in another window, an InvalidParentException will occur.
The following example sets the parent of the control to the window.
Me.Parent = Nil
DesktopRadioButton.Scope
Scope As Integer
Used to determine whether access to the control is Public (0) or Private (2). The default is Public.
This property is read-only.
Note
This is a designtime-only property and thus can only be set in the Inspector and is not accessible via code.
If the Scope of a control is set to Private, it cannot be accessed from outside its parent window.
DesktopRadioButton.TabIndex
TabIndex As Integer
The control's position in the Tab Order. The control with whose TabIndex is 0 will get the focus first.
On macOS, only controls where you enter data from the keyboard typically get the focus. In order to manually set focus to controls that don't allow keyboard entry, go to System Preferences, click on the Keyboard icon then on the Shortcuts tab and then check the Use keyboard navigation to move focus between controls checkbox.
This example sets the control's TabIndex.
Me.TabIndex = 2
DesktopRadioButton.Tag
Tag As Variant
A “hidden” value associated with the radio button.
The tag is accessible via code when the user chooses the menu item but, unlike the Caption property, is not displayed in the radio button. It works like the RowTag property of a DesktopPopupMenu control.
DesktopRadioButton.Tooltip
Tooltip As String
Text of help message displayed as a Windows or Linux "tooltip" or macOS help tag.
The tip/tag is displayed when the user hovers the mouse cursor over the control.
This example adds a tooltip to a control:
Me.Tooltip = "Click to bark."
DesktopRadioButton.Top
Top As Integer
The distance from the top of the control to the top of its containing window or container.
This example sets the top of the control to 140 points from the top of the window:
Me.Top = 140
DesktopRadioButton.Transparent
Transparent As Boolean
Determines whether the control is transparent on Windows. The default is False. Has no effect on macOS or Linux.
Transparent controls draw more slowly and use more memory in order to cache the background. Unless you absolutely require transparency, leave this set to False.
For projects that were created prior to 2018r1, this property defaults to True to emulate previous behavior. Consider changing it to False to improve performance if you do not require transparency.
DesktopRadioButton.Underline
Underline As Boolean
If True, applies the underline style to the control's text.
This code underlines the control's text or caption property.
Me.Underline = True
DesktopRadioButton.Value
Value As Boolean
Gets or sets the value of the radio button: True if the RadioButton is checked and False if it is not checked.
Displays the selected radio button for a collection of radio buttons in a Control Set:
Sub Pressed (Index As Integer)
MessageBox("You chose radio button " + index.ToString + ".")
End Sub
To select a specific RadioButton in a control set, you use its Index property in code to refer to the RadioButton whose value you want to set. For example, the following line sets the second RadioButton from code.
RadioButton1(1).Value = True ' 0-based
DesktopRadioButton.Visible
Visible As Boolean
Determines whether the control is visible when its owning window is opened. The default is True: the control is visible.
The following code makes the control invisible:
Me.Visible = False
DesktopRadioButton.Width
Width As Integer
The width (in points) of the control.
The following example resizes the control:
Me.Width = 200
DesktopRadioButton.Window
Window As DesktopWindow
The control's parent window.
This property is read-only.
This code gets the parent window's Title property.
MessageBox(Me.Window.Title)
Method descriptions
DesktopRadioButton.AcceptFileDrop
AcceptFileDrop(FileType As String)
Permits documents of type FileType to be dropped on the control. FileType must be a file type that you defined in via the FileType class or the File Type Sets Editor.
This code in the Opening event makes it possible for the user to drop either a picture or a file that is a jpeg image. The File Type Sets editor was used to define the “image/jpeg” file type. It is one of the “Common File Types” that is available in the editor.
Me.AcceptPictureDrop
Me.AcceptFileDrop("image/jpeg")
To restrict file drops to just folders (and not files), you can put this code in the DragEnter event:
If Not obj.FolderItem.IsFolder Then Return True
DesktopRadioButton.AcceptPictureDrop
AcceptPictureDrop
Permits pictures to be dropped on the control.
If a control should accept pictures in a drag and drop, then AcceptPictureDrop needs to be called prior to the drop. Typically, it is in the Opening event of the control itself. For example, the line:
Me.AcceptPictureDrop
in the Opening event of the control that will receive the dragged pictures is needed. When the picture is dropped, the DropObject event is called and this is where you will put your code to handle the drop.
Opening Event:
Me.AcceptPictureDrop
DropObject Event:
If obj.PictureAvailable Then
Me.Backdrop = obj.Picture
End If
DesktopRadioButton.AcceptRawDataDrop
AcceptRawDataDrop(Type As String)
Permits data (of the Type specified) to be dropped on the control.
The following specfies a generic file type defined in the File Type Sets editor.
Me.AcceptRawDataDrop("????")
DesktopRadioButton.AcceptTextDrop
AcceptTextDrop
Permits text to be dropped on the control.
This line in the Opening event of a control that can accept dragged text.
Me.AcceptTextDrop
DesktopRadioButton.Close
Close
Closes a control.
Closing a control permanently removes the control from memory, making it impossible to access. You can close both non-indexed controls and indexed controls. When you close an indexed control, the indexes for the remaining controls will shift downward so that the indexes start with zero and are consecutive.
The following code closes the control. When this is executed from a visible control, the control disappears from the window.
Me.Close
DesktopRadioButton.Constructor
Constructor(caption as String, enabled as Boolean = True)
Note
Constructors are special methods called when you create an object with the New keyword and pass in the parameters above.
Creates a new DesktopRadioButton with the caption and enabled state passed.
DesktopRadioButton.DrawInto
DrawInto(g As Graphics, x As Integer, y As Integer)
Draws the contents of the control into the specified Graphics context. The parameters x and y are the coordinates of the top, left corner.
Note
DrawInto will only work if the control is on a window or container.
This example draws the current control into the Graphics of a Picture and then displays it as the Backdrop of a Canvas:
Var p As New Picture(Me.Width, Me.Height)
Me.DrawInto(p.Graphics, 0, 0)
Canvas1.Backdrop = p
DesktopRadioButton.Refresh
Refresh(immediately As Boolean = False)
Redraws the portion specified of the contents of the control the next time the OS redraws the control or immediately if True is passed.
If you are calling this so frequently that you experience a slowdown in your code, pass True for the immediately parameter.
Calling this method causes the Render event to fire.
Refresh the entire area immediately:
Me.Refresh(True)
DesktopRadioButton.Refresh
Refresh(x As Integer, y As Integer, width As Integer, height As Integer, immediately As Boolean = False)
Redraws the portion specified of the contents of the control the next time the OS redraws the control or immediately if True is passed.
Refresh a portion of the area the next time the OS redraws the control:
Me.Refresh(100, 150, 200, 300)
DesktopRadioButton.SetFocus
SetFocus
If applicable, sets the focus to the DesktopUIControl. KeyDown events are directed to the control.
If the control cannot get the focus on the platform on which the application is running, SetFocus does nothing. The SetFocus method of the DesktopWindow class or the ClearFocus method can be used to remove the focus from the control that currently has the focus, leaving no control with the focus.
Note
On the Mac you need Full Keyboard Access turned on in System Preferences (Keyboard->Shortcuts) in order to manually set focus to non-text controls.
The following example in the Opening event sets the focus to the that control. If another control has the focus when this line is executed, then the user sees this control gets the focus.
Me.SetFocus
Event descriptions
DesktopRadioButton.Closing
Closing
The control is closing.
DesktopRadioButton.ConstructContextualMenu
ConstructContextualMenu(Base As DesktopMenuItem, x As Integer, y As Integer) As Boolean
This event is called when it is appropriate to display a contextual menu for the control.
This event handler is the recommended way to handle contextual menus because this event figures out whether the user has requested the contextual menu, regardless of how they did it. Depending on platform, it might be in the MouseUp or MouseDown event and it might be a right+click or by pressing the contextual menu key on the keyboard, for example.
Base is analogous to the menu bar for the contextual menu. Any items you add to Base will be shown as menu items. If you return False, the event is passed up the parent hierarchy.
If you return True, the contextual menu is displayed. The parameters x and y are the mouse locations. If the event was fired because of a non-mouse event, then x and y are both set to -1. See the example of a contextual menu in the following section.
The following ConstructContextualMenu event handler builds a menu with three menu items plus a submenu with three additional menu items.
' Add some items
base.AddMenu(New DesktopMenuItem("Test 1"))
base.AddMenu(New DesktopMenuItem("Test 2"))
base.AddMenu(New DesktopMenuItem("Test 3"))
' Add a Separator
base.AddMenu(New DesktopMenuItem(DesktopMenuItem.TextSeparator))
' Add a sub menu
Var submenu As New DesktopMenuItem("SubMenu")
submenu.AddMenu(New DesktopMenuItem("SubMenu Test 1"))
submenu.AddMenu(New DesktopMenuItem("SubMenu Test 2"))
submenu.AddMenu(New DesktopMenuItem("SubMenu Test 3"))
base.AddMenu(submenu)
' Add a Separator
base.AddMenu(New DesktopMenuItem(DesktopMenuItem.TextSeparator))
Return True
DesktopRadioButton.ContextualMenuItemSelected
ContextualMenuItemSelected(HitItem As DesktopMenuItem) As Boolean
Fires when a contextual menuitem selectedItem was selected but the MenuItemSelected event and the MenuHandler for the DesktopMenuItem did not handle the menu selection.
This event gives you a chance to handle the menu selection by inspecting the menuitem's Text or Tag properties to see which item was selected. Use this in conjunction with ConstructContextualMenu if you have not specified the MenuItemSelected event or the Menu Handler for the items on the contextual menu. See the example of a contextual menu in the examples for the DesktopUIControl class.
Return True if this event has handled the item the user chose from the contextual menu. Returning False will cause the control's parent to execute its ContextualMenuItemSelected event. This can be handy if you have the same contextual menu for several controls who share the same Parent (several on the same window for example). By returning False you can handle them all in a single event.
This simple event handler displays the value of the selected menu item.
If selectedItem <> Nil Then MessageBox(selectedItem.Text)
Return True
DesktopRadioButton.DragEnter
DragEnter(obj As DragItem, Action As DragItem.Types) As Boolean
Fires when the passed DragItem enters the DesktopUIControl.
Returns a Boolean. Return True from this event to prevent the drop from occurring.
The Action parameter specifies the type of drag action.
To restrict file drops to just folders (and not files), you can put this code in the DragEnter event:
If Not obj.FolderItem.IsFolder Then Return True
DesktopRadioButton.DragExit
DragExit(obj As DragItem, Action As DragItem.Types)
Fires when the passed DragItem exits the DesktopUIControl.
The Obj parameter is the item being dragged. The Action parameter specifies the type of drag action.
DesktopRadioButton.DragOver
DragOver(x As Integer, y As Integer, obj As DragItem, Action As DragItem.Types) As Boolean
Fires when the DragItem is over the DesktopUIControl.
The Obj parameter is the object being dragged. The coordinates x and y are relative to the DesktopUIControl. Returns a Boolean. Return True from this event to prevent the drop from occurring.
The Action parameter specifies the type of drag action, which is typically done by holding down a modifier key (Shift, Alt, Option, Command, etc.) while doing the drag.
DesktopRadioButton.DropObject
DropObject(Obj As DragItem Action As DragItem.Types)
The item represented by Obj has been dropped on the control.
The Obj parameter is the object being dragged. The Action parameter specifies the type of drag action.
The following DropObject event handler can handle either a dropped picture or a dropped file. The type of file that it can handle needs to have been specified in a call to AcceptFileDrop prior to the drop, for example, in the Opening event.
If Obj.PictureAvailable Then
Me.Image = obj.Picture
ElseIf Obj.FolderItemAvailable Then
Me.Image = Picture.Open(obj.FolderItem)
End If
DesktopRadioButton.FocusLost
FocusLost
The control has lost the focus.
Note
On macOS, controls other than text fields and lists will accept and lose focus only if the full keyboard access option is enabled in System Preferences/Keyboard.
DesktopRadioButton.FocusReceived
FocusReceived
The control has received the focus and has a selection rectangle around it.
Note
On macOS, controls other than text fields and lists will accept focus only if the full keyboard access option is enabled in System Preferences/Keyboard.
DesktopRadioButton.KeyDown
KeyDown(Key As String) As Boolean
The user has pressed the Key passed while the control has the focus.
Returning True prevents the KeyDown event on the parent control (usually the window) from executing. Returning False results in the execution of the KeyDown event of the parent control.
DesktopRadioButton.KeyUp
KeyUp(Key As String)
Fires when the passed Key is released in the control that has the focus.
It is not guaranteed to be the same key that received the KeyDown event.
DesktopRadioButton.MouseDown
MouseDown(X As Integer, Y As Integer) As Boolean
The mouse button was pressed inside the control's region at the location passed in to x, y.
This event fires repeatedly while the mouse button is being held down.
The coordinates x and y are local to the control, i.e. they represent the position of the mouse click relative to the upper-left corner or the control.
Return True if you are going to handle the MouseDown. In such a case:
The Pressed event, if any, will not execute and the state of the object will not change.
You will receive the MouseUp event.
If you return False, the system handles the MouseDown so the MouseUp event handler do not get called.
The MouseDown event uses the DragItem constructor when the user drags the contents of the control. It is:
Var d As DragItem
d = New DragItem(Self, Me.Left, Me.Top, Me.Width, Me.Height)
d.Picture = Me.Image
d.Drag ' Allow the drag
DesktopRadioButton.MouseDrag
MouseDrag(X As Integer, Y As Integer)
The mouse button was pressed inside the control and moved (dragged) at the location local to the control passed in to x, y.
This event fires repeatedly while the mouse button is down regardless of whether or not the mouse coordinates are changing.
This event will not occur unless you return True in the MouseDown event.
DesktopRadioButton.MouseEnter
MouseEnter
The mouse has entered the area of the control.
DesktopRadioButton.MouseExit
MouseExit
The mouse has left the area of the control.
DesktopRadioButton.MouseMove
MouseMove(X As Integer, Y As Integer)
The mouse has moved within the control to the coordinates passed. The coordinates are local to the control, not to the window.
DesktopRadioButton.MouseUp
MouseUp(X As Integer, Y As Integer)
The mouse button was released. Use the x and y parameters to determine if the mouse button was released within the control's boundaries.
Note
This event will not occur unless you return True in the MouseDown event. The return value is ignored.
The parameters x and y are local coordinates, i.e. they represent the position of the mouse click relative to the upper-left corner or the control. Mouse clicks that are released to the left or above a control are negative.
DesktopRadioButton.MouseWheel
MouseWheel(X As Integer, Y As Integer, DeltaX As Integer, DeltaY As Integer) As Boolean
The mouse wheel has been moved.
The parameters X and Y are the mouse coordinates relative to the control that has received the event. The parameters DeltaX and DeltaY hold the number of scroll lines the wheel has been moved horizontally and vertically, as defined by the operating system. DeltaX is positive when the user scrolls right and negative when scrolling to the left. DeltaY is positive when the user scrolls down and negative when scrolling up.
Returns a Boolean. Return True to prevent the event from propagating further.
DesktopRadioButton.Opening
Opening
The control is about to be displayed. Use this event to initialize a control.
The Opening event is called after the Constructor.
Be warned that initializing control property values using the Constructor instead of the Opening event may result in those property values being overwritten by what is set in the Inspector. For best results, use the Opening event for control initialization rather than the control Constructor.
If the control is supposed to handle drag and drop, you need to tell it which type of item it needs to be able to handle. The following example informs the control that pictures and files can be dropped on it. The type of the file it needs to support is specified via the File Types Editor.
Sub Opening()
Me.AcceptPictureDrop
Me.AcceptFileDrop("JPEG")
End Sub
Notes
This control is used in the DesktopRadioGroup control.
If the Caption property contains an ampersand character, it will display only if it is preceded by another ampersand character. This is done to make applications on all platforms behave consistently.
Compatibility
Desktop projects on all supported operating systems.
See also
DesktopUIControl parent class; DesktopRadioGroup control